PIPESTRESS - Detection of over 1,000 input data errors
From its inception, PIPESTRESS and the utility programs which form part of this package have been highly protected against input data errors. This remarkable feature is a great time-saver, avoids using wrong data and assists the engineers in learning to use the program.
1 INVALID CHARACTER ON CARD
2 ANALYSIS CONTROL CARD MISSING OR OUT OF ORDER
3 Not used
4 ALGEBRAIC COMBINATION INVOLVES UNSIGNED CASES (WARNING)
5 FACTOR J SPECIFIED AND CONSTITUENT CASE J NOT SPECIFIED
6 PIPING CODE INVALID IDEN CARD
7 VALIDATION CODE INVALID IDEN CARD
8 INVALID UNITS OPTION
9 CONSTITUENT CASES MAY BE STATIC CASES OR COMBINATION CASES WITH ME=0 or ME=3
10 MAXIMUM NUMBER OF MODES INVALID ON FREQ CARD
11 INVALID LEFT-OUT-FORCE REPORT OPTION ON FREQ CARD
12 VERTICAL INCORRECTLY SPECIFIED ON IDEN CARD
13 FREQ CARD OUT OF ORDER OR MORE THAN ONE FREQ CARD
14 DUPLICATE CASE NUMBER
15 INVALID ANALYSIS TYPE
16 CONSTITUENT CASE J SPECIFIED AND CONSTITUENT CASE J-1 NOT SPECIFIED
17 MORE THAN 20 CONSTITUENT CASES
18 INVALID METHOD FOR FATIGUE ANALYSIS EQUATION 13 (KTA EQUATION 6)
19 INVALID REPORT VALUE
20 INVALID REPORT TYPE
21 G-FACTOR EXCEEDS 10 ON LCAS CARD
22 LCAS CARD FIELD F4 MUST BE BLANK FOR NON THERMAL LOAD CASE OR CLASS 1
23 NON-ZERO G-FACTOR FOR THERMAL EXPANSION CASE ON LCAS CARD
24 INVALID CASE NUMBER. MUST BE INTEGER IN RANGE 1 TO 900
25 INVALID COMBINATION METHOD
26 FIRST CASE NOT SPECIFIED ON CCAS CARD
27 ONE OF THE CASES TO BE COMBINED DOES NOT CORRESPOND TO A PREVIOUSLY CALCULATED CASE
28 MORE THAN ONE TEST WEIGHT CASE
29 TITL CARD MISSING
30 X, Y AND Z FACTORS MUST BE ZERO FOR WEIGHT OR DYNAMIC DISPLACEMENT ANALYSIS
31 JOB NUMBER ON RESULTS/RESTART FILE DOES NOT AGREE WITH IDEN CARD
32 INPUT RESTART FILE INCOMPATIBLE WITH ROTATIONAL INERTIA OPTION
33 MAXIMUM NUMBER OF ITERATIONS NOT IN THE RANGE 50 .LE. ITMAX .LE. 1000
34 MISSING DAMPING FOR MODAL SUPERPOSITION METHOD
35 X, Y AND Z G-FACTORS CANNOT ALL BE ZERO
36 PERCENT OF CRITICAL DAMPING NEGATIVE OR GREATER THAN 50 PERCENT
37 NO LOAD CASES PRECEDING THIS COMBINATION CASE
38 DURATION OF EARTHQUAKE NEGATIVE
39 GMC OPTION CONFLICTING WITH SUPERPOSITION METHOD
40 GMC OPTION CANNOT BE USED FOR MULTILEVEL ANALYSIS
41 CARD(S) NOT AT THE RIGHT PLACE (SEE SECTION 2 FOR THE ORDER)
42 ALLOWABLE STRESS REFERENCE CASE NOT FOUND ON LSET CARD
43 REFERENCE CASE MUST BE PRESENT ON LSET CARD
44 NUMBER OF CYCLES INVALID ON LSET CARD
45 MISSING EVENT NUMBER ON SPECTRUM CARD
46 INVALID PRESSURE CASE ON LSET CARD
47 INVALID MOMENT CASE ON LSET CARD
48 INVALID TRANSIENT CASE ON LSET CARD
49 RESPONSE ANALYSIS USING LEFT-OUT-FORCE METHOD MUST USE ALL MODES CALCULATED ON RESULTS/RESTART FILE
50 EVENT/LEVEL NUMBERS INCONSISTENT
51 DIRECTION NOT X OR Y OR Z
52 DUPLICATE DIRECTION SPECIFICATION
53 SHIFT NOT BETWEEN 0 AND 50 PERCENT
54 NO SPECTRUM DATA FOLLOW SPEC CARD
55 SPECTRAL ACCELERATIONS TOO GREAT
56 INVALID TEE STRESS COMPUTATION OPTION
57 X, Y AND Z DIRECTIONS HAVE NOT ALL BEEN SPECIFIED
58 OVER 200 FREQUENCY/ACCELERATION OR PERIOD/ACCELERATION PAIRS HAVE BEEN SPECIFIED FOR A GIVEN LEVEL/DIRECTION
59 Not used
60 FREQUENCY OR PERIOD NEGATIVE OR NOT INCREASING FOR A GIVEN LEVEL/DIRECTION
61 Not used
62 NO OPERATING WEIGHT CASE FOR FATIGUE ANALYSIS
63 NO DYNAMIC WITHOUT ANCHOR MOVEMENT CASE FOR FATIGUE ANALYSIS
64 FOR FATIGUE ANALYSIS ALL LOAD SETS WHICH INCLUDE A DYNAMIC MOMENT CASE MUST SPECIFY A PRESSURE CASE
65 NO SEISMIC LOAD SETS FOR FATIGUE ANALYSIS
66 FOR FATIGUE ANALYSIS, THE SEISMIC PRESSURE BASE CASE IS NOT USED FOR ANY MOMENT CASE
67 NO LOAD CASES WERE SPECIFIED
68 NO LOAD SETS WERE SPECIFIED
69 INSUFFICIENT OR INCORRECT INFORMATION FROM FREQUENCY ANALYSIS
70 ONLY ONE LOAD SET WITH DYNAMIC FLAG
71 MORE THAN TWO LOAD SETS WITH THE SAME DYNAMIC FLAG
72 Not used
73 TWO DYNAMIC LOAD SETS SHOULD HAVE THE SAME NUMBER OF CYCLES
74 FILE NAME DOES NOT MATCH SPEC CARD
75 WRONG FIELD F1, F2, F3 OR F4 ON FATP CARD
76 INVALID VALUE FOR SPECTRAL RANGE OPTION (RA)
77 INVALID VALUE FOR FREQUENCY/PERIOD OPTION (FP)
78 PERCENT OF CRITICAL DAMPING NEGATIVE OR GREATER THAN 10 PERCENT
79 PERCENT SHIFT NEGATIVE OR GREATER THAN 50 PERCENT
80 THAFF/GCAS JOB NUMBERS DO NOT AGREE
81 Not used
82 NUMBER OF TIME STEPS ON THAFF LESS THAN 1 OR GREATER THAN 10000
83 POINT WHERE FORCING FUNCTION IS ACTING IS NOT A MASS POINT
84 X, Y AND Z FACTORS ALL ZERO
85 THAFF MISSING
86 THAFF INCORRECT
87 INVALID INTERPOLATION METHOD OPTION (ME)
88 SHIFTED LOWEST NATURAL FREQUENCY OUTSIDE RANGE OF FLOOR RESPONSE SPECTRUM
89 INVALID REPORT OPTION (RP)
90 Not used
91 TOO MANY LCAS + CCAS + CSTR CASES
92 MORE THAN 100 EVENTS
93 SPECTRUM ALREADY SPECIFIED
94 EVENT/LEVEL INVALID
95 MISSING SPECTRUM
96 RESULTANT SUPPORT POINT MOVEMENT OUTSIDE ALLOWABLE RANGE 20 IN (500 MM)
97 REFERENCE CASE MUST REFER TO BASE CASE
98 Not used
99 Not used
100 Not used
101 D2 MISSING
102 NO LEVEL DATA
103 NO MASS POINT DATA FOR MODEL/SUBMODEL
104 D1 MISSING OR OUT OF ORDER
105 NO SPFILE
106 SPFILE NOT IN CORRECT FORMAT
107 SPFILE HEADER=$ERROR. ERROR OCCURRED DURING SPFILE CREATION
108 INPUT UNITS AND SPFILE UNITS DO NOT AGREE (WARNING)
109 END OF FILE ENCOUNTERED ON SPFILE. SPFILE NOT COMPLETE.
110 DUPLICATE SPECTRUM SET (EVENT/MODEL) ON SPFILE
111 Not used
112 DUPLICATE MASSPOINT ON SPFILE
113 NUMBER OF FREQUENCY/ACCELERATION PAIRS INVALID
114 MASSPOINT (S) MISSING ON SPFILE
115 SPECTRUM SET (EVENT/MODEL) MISSING ON SPFILE
116 D2 CASE NUMBER DOES NOT AGREE WITH D1
117 Not used
118 INVALID VALUE FOR SUPERPOSITION OPTION (SU)
119 EVENT MISSING FOR SECONDARY SOLUTION
120 INVALID PRIMARY/SECONDARY CODE (FIELD I3)
121 FIELD I2 MUST BE BLANK OR 0
122 FREQUENCY/ACCELERATION OR PERIOD/ACCELERATION PAIR MISSING
123 NO LEVEL DATA FOR SECONDARY EVENT
124 MAXIMUM X, Y OR Z MOVEMENT NEGATIVE
125 NUMBER OF FREQUENCY/ACCELERATION OR PERIOD/ACCELERATION PAIRS DOES NOT AGREE
126 PRESSURE REFERENCE CASE NOT FOUND
127 FIELDS I2 to I4 NOT USED ON LCAS CARD
128 EVENT NUMBER MISSING ON RCAS CARD
129 INVALID VALUE FOR CODE EQUATION/OUTPUT OPTION (EQ)
130 INVALID VALUE FOR COMBINATION METHOD OPTION (ME)
131 WARNING: STRESS CALCULATED FROM COMBINED MOMENTS
132 Not used
133 THE FIRST CONSTITUENT CASE IS NOT OCCASIONAL FOR COMBINATION METHOD OPTION (ME) = 3
134 REFERENCE CASE MISSING FOR HOT MODULUS ON CCAS OR CSTR CARD
135 RIGID MODE CUT-OFF FREQUENCY OUTSIDE ALLOWABLE RANGE (0 TO 1000 CPS)
136 Not used
137 NUMBER OF FORCING FUNCTION COMPONENTS INVALID ON THAFF
138 NUMBER OF GLOBAL DEGREES OF FREEDOM FOR FORCING FUNCTION INVALID ON THAFF
139 UNITS INVALID ON THAFF
140 UNITS ON THAFF DO NOT AGREE WITH INPUT UNITS (WARNING)
141 LESS THAN 10 TIME STEPS ON THAFF (WARNING)
142 TIME STEPS NEGATIVE OR DECREASING ON THAFF
143 DYNAMIC LOAD CASES WITH NO MODES
144 RESULTS/RESTART FILE NOT IN REQUIRED FORM
145 A CONSTITUENT CASE WITH OUTPUT OPTION (OP) = 8 or 9 or A or B or C or D MAY NOT BE USED FOR THIS CASE
146 Not used
147 Not used
148 Not used
149 INVALID VALUE COLUMN 19
150 MAXIMUM FREQUENCY/MINIMUM PERIOD (FR/PE) OPTION NOT CONSISTENT WITH PREVIOUS RUN
151 MODELLING OPTION NOT COMPATIBLE WITH PREVIOUS RUN
152 CODE VERSION OPTION NOT COMPATIBLE WITH PREVIOUS RUN
153 INVALID VALUE FOR CODE VERSION OPTION
154 INVALID VALUE FOR BODY LOAD OPTION
155 INVALID VALUE FOR GENERATED CASES REPORT OPTION
156 INVALID VALUE FOR GLOBAL/LOCAL REPORT OPTION
157 INVALID VALUE FOR SUPPORT SUMMARY REPORT OPTION
158 THE NUMBER OF TIME STEPS AND THE NUMBER OF MODES MUST BE THE SAME FOR ALL CASES
159 GLOBAL/LOCAL REPORT OPTION NOT COMPATIBLE WITH PREVIOUS RUN
160 ONLY COMBINATION CASES MAY BE SUBMITTED FOR MIXED CLASSES RESTART
161 HOT MODULUS OPTION NOT COMPATIBLE WITH PREVIOUS RUN
162 PIPING CODE OPTION NOT COMPATIBLE WITH PREVIOUS RUN
163 DIRECTION OF GRAVITY NOT COMPATIBLE WITH PREVIOUS RUN
164 STRESSES COMPUTATION OPTION NOT COMPATIBLE WITH PREVIOUS RUN
165 STRESSES COMPUTATION OPTION NOT COMPATIBLE WITH PREVIOUS RUN (WARNING)
166 REG.GUIDE 1.92 VERSION OPTION NOT COMPATIBLE WITH PREVIOUS RUN
167 GLOBAL/LOCAL OPTION INCOMPATIBLE WITH VERSION OPTION
168 STRESS COMPUTATION OPTION INCOMPATIBLE WITH VERSION OPTION
169 REG GUIDE 1.92 VERSION OPTION NOT COMPATIBLE WITH VERSION OPTION
170 WRONG Ci VALUE (S)
171 OUTPUT OPTION 8 OR 9 FOR NON ADDITIVE STRESS CASE OR NO STRESS REPORT REQUESTED
172 LEFT-OUT-FORCE REPORT OPTION INCOMPATIBLE WITH LEFT-OUT-FORCE OPTION
173 REFERENCE CASE NOT COMPATIBLE WITH HOT MODULUS OPTION
174 FACTORS MUST BE POSITIVE
175 SIGNS OF FACTORS FOR SIGNED CASES MUST BE THE SAME
176 MORE THAN ONE G-FACTOR (WARNING)
177 FOR ANSI/B31.3 CODE, THE STRESSES ARE BASED ON LOCAL MOMENTS
178 SUPPORT SUMMARY REPORT REQUESTED AND ALL CASES ARE SUPPRESSED (WARNING)
179 INVALID REFERENCE CASE
180 FOURTH CONSTITUENT CASE NOT USED FOR CSTR CASES
181 MC CASE MAY NOT BE USED FOR ASME EQ. 9 (B31.1 & B31.3 EQ. 12, RCC-M EQ. 11, KTA EQ. 80)
182 MB CASE MAY NOT BE USED FOR ASME EQ. 11 (B31.1 & B31.3 EQ. 14, RCC-M EQ. 8, KTA EQ. 84) AND FOR N-155-2 EQ.8
183 MA CASE IS NOT A SUSTAINED LOAD
184 MB OR MC CASE MAY NOT BE A SUSTAINED LOAD
185 INVALID OPTION
186 MAY ONLY BE USED FOR CLASS 1 ANALYSIS
187 TOO MANY CASES FOR -PIPE LOADS FOR RESTRAINT LOCATIONS- REPORT
188 RESPONSE CASE AND NO SPECTRA
189 Not used
190 IMPROPER TYPE OF CARD FOR THIS VERSION OF CODE
191 INVALID VALUE FOR NON-ADDITIVE STRESS OPTION (FIELD I5) FOR THIS PIPING CODE
192 IMPROPER OUTPUT OPTION FOR THIS VERSION OF CODE
193 THACC FILE MISSING
194 THACC/RACC EVENT NUMBERS DO NOT AGREE
195 THACC FILE INCORRECT
196 NUMBER OF ACCELERATION FUNCTION COMPONENTS INCORRECT
197 NUMBER OF TIME STEPS LESS THAN 1 OR GREATER THAN 100,000
198 MORE THAN 10 RACC-CASES FOR THACC FILE OPTION
199 LEVEL NUMBER MISSING ON FILE THACC
200 INVALID VALUE FOR DAMPING OPTION
201 NO USER DEFINED MODAL DAMPING FILE
202 PP CARD MISSING AFTER RC CARD WITH COL. 19=9
203 NUMBER OF DAMPING VALUES LESS THAN NUMBER OF MODES
204 GCAS AND RACC CANNOT BE CALCULATED IN THE SAME EXECUTION
205 USER DEFINED MODAL DAMPING FILE INCORRECT
206 ACCELERATION MISSING FOR DIRECTION X, Y OR Z, ON THACC FILE
207 DUPLICATE ACCELERATION FOR DIRECTION X, Y OR Z, ON THACC FILE
208 COMPOSITE DAMPING NOT FOUND FOR METHOD REQUESTED
209 HEADER RECORD INCORRECT FOR USER DEFINED MODAL DAMPING FILE
210 NO USER DEFINED DAMPING FOR CASE
211 INVALID VALUE FOR STRUCTURAL DAMPING FILE OPTION
212 NUMBER OF MODAL DAMPING VALUES MUST BE THE SAME FOR ALL CASES ON MODAL DAMPING FILE
213 INVALID UNITS ON SPFILE
214 NEGATIVE FACTOR FOR ALLOWABLE STRESS
215 INVALID VALUE FOR PRESSURE STRESS TERM OPTION
216 FLAG NOT FOUND
217 DUPLICATE FLAG VALUE
218 IMPROPER COMBINATION METHOD, NO OCCASIONAL LOAD CASE (MB CASE)
219 INVALID VALUE FOR METHOD OPTION (COL.S 21-22)
220 FREQUENCIES ARE DIFFERENT ON COMPOSITE DAMPING FILE
221 INVALID VALUE FOR OUTPUT OPTION (OP)
222 THE MIDPOINT OF THE REDUCER MAY NOT BE USED AS FATIGUE 'AT' POINT
223 MAXIMUM RESULTANT MOMENT RANGE METHOD OF COMBINATION REQUIRES AT LEAST TWO CASES
224 ASME CLASS 3 1983 NOT IMPLEMENTED. ASME CLASS 2 1983 IS USED (WARNING)
225 GENERATED CASES MAY NOT BE COMBINED
226 MORE THAN 10 'GCAS' OR 'RACC' CASES
227 FORCE/DISPLACEMENT OPTION INVALID
228 ABSOLUTE/RESULTANT OPTION INVALID
229 CASE NUMBER DOES NOT AGREE
230 CARD NOT AN 'GCAS' OR AN 'RACC'
231 FIELD I3 NOT EQUAL TO '8'
232 MORE THAN 20 LINE NO. PAIRS
233 NO LINE NO. PAIRS
234 INVALID LINE NO.
235 LINE NO.S OUT OF ORDER
236 JOB NO. DOES NOT AGREE
237 NO DEFAULT OUTPUT OPTION FOR DYNAMIC EVENT. FOR OBE USE EQ=3 OR EQ=W. FOR DBE USE EQ=4 OR EQ=Y.
238 B31.1 winter 1981: OUTPUT OPTION 8 = NEW EQUATION 13 (WARNING)
239 NO PAIR OF LOAD SETS WITH THE SAME SITUATION NUMBER
240 MORE THAN TWO LOAD SETS USING THE SAME SITUATION NUMBER
241 THE TWO LOAD SETS OF A SITUATION SHOULD HAVE THE SAME NUMBER OF CYCLES
242 THE PRESSURE ELONGATION OPTION IS NOT USED IN CLASS 1 (WARNING)
243 CSTR CARD MAY NOT BE USED IN CLASS 1
244 INVALID COLD MODULUS OPTION
245 THE REFERENCE CASE CANNOT BE A BASE CASE WITH THE COLD MODULUS OPTION
246 COLD MODULUS OPTION USED FO EARLY CODE VERSION - WARNING
247 THE COLD MODULUS OPTION IS NOT USED IN CLASS 1 (WARNING)
248 DESIGN OPTION MAY NOT BE USED FOR CLASS 1 ANALYSIS
249 THE MOMENT CASE CANNOT BE A SEIMIC CASE
250 THERE MAY BE ONLY ONE COMBINATION CASE WITH A FLAG
251 THE FOLLOWING OPTIONS HAVE BEEN SET: OP=6 (MOMENT AND STRESS REPORT ONLY) EQ=7 (THERMAL EXPANSION STRESSES)
252 PIPING CODE "N" FOR COMPOSITE MATERIALS IS OBSOLETE - PIPING CODE "E" (EDF) MAY BE APPLICABLE
253 CV=S0 HAS BEEN CONVERTED TO CV=S1 (WARNING)
254 NO DEFAULT OUTPUT OPTION FOR THIS ANALYSIS TYPE FOR EDF PIPING CODE
255 FOR EDF PIPING CODE, OCCASIONAL LOADS MAY NOT BE USED FOR EQ=A (EQUATION 4.2A)
256 NON-LINEAR CASES MAY ONLY BE COMBINED BY RANGE METHOD (ME=8)
257 NON-LINEAR LOAD CASES MAY NOT BE USED FOR STATIC EQUIVALENT DYNAMIC EVENTS (TY=1 or TY=2 or Ty=6)
258 INVALID NUMBER OF ITERATIONS FOR NON?LINEAR LOAD CASE
259 PROGRAMMING TO CALCULATE US NAVY PIPING CODE IS THE PROPERTY OF THE ELECTRIC BOAT CORPORATION
260 CASE ORDERING PARAMETERS MUST SATISFY [0 less than or equal x0] AND [0x less than x1] AND [x1 less than or equal 1]
261 MORE THAN 20 NON?LINEAR CASES WITH ORDERING PARAMETERS
262 WESTINGHOUSE GACA METHOD OF MODAL SUPERPOSITION MAY ONLY BE USED FOR SINGLE LEVEL CALCULATIONS
263 TO SELECT WESTINGHOUSE GACA METHOD OF MODAL SUPERPOSITION USE "SU=W" ON RCAS CARD
264 OUTPUT OPTION EQ=S MAY ONLY BE USED FOR SETTLEMENT TYPE ANALYSIS (TY=5)
265 VALID VALUES OF FIELD EQ=2, 3 OR 7
266 COMPONENT DIRECTION VALUES FOR X, Y, Z: ONE OF THESE VALUES MUST=1 AND THE OTHERS MUST=0 FOR EACH COMPONENT
267 Not used
268 OUTPUT OPTION EQ=S MAY ONLY BE USED FOR POST 1977 VERSIONS OF B31.1, ASME CLASSES 2 & 3, B31.3 AND SNCT AND EN 13480-3
269 WARNING: SETTLEMENT ALLOWABLE STRESS FOR ASME CLASS 2 IS USED FOR THIS CASE
270 PP CARD NOT PROCESSED
271 ERROR - COLD MODULUS OPTION USED. FOR EN 13480-3 CODE, HOT MODULUS OPTION MUST BE USED (SEE MD FIELD ON TITL CARD)
272 PRESSURE STRESS TERM Pd2/(D02 - d2) IS NOT DEFINED FOR EN 13480-3
273 ABS SEED NOT IN RANGE 0 < S < 1
274 NUMBER OF CYCLES INVALID
275 WARNING: COLD MODULUS OPTION USED. FOR EN 13480-3 CODE, HOT MODULUS OPTION MUST BE USED (SEE EC FIELD ON LCAS CARD)
276 WARNING - PARAGRAPH 12.3.6-1 FOR EN 13480-3 IS NOT CORRECTLY IMPLEMENTED FOR CREEP
277 HEADER RECORD INCORRECT FOR COMPOSITE MODAL DAMPING FILE
278 COMPOSITE MODAL DAMPING FILE NOT FOUND
279 MORE THAN 20 LEVELS FOR COMPOSITE MODAL DAMPING - CONTACT DST COMPUTER SERVICES
280 COMPOSITE MODAL DAMPING ERROR - SEE MESSAGE
281 MORE THAN 200 MODES FOR COMPOSITE DAMPING
282 END-OF-FILE OR INVALID DATA ENCOUNTERED ON COMPOSITE MODAL DAMPING FILE
283 INSUFFICIENT INFORMATION ON COMPOSITE DAMPING FILE FOR REQUIRED INTERPOLATIONS
284 PERIOD vs ACCELERATION SPECTRA NOT IMPLEMENTED FOR COMPOSITE MODAL DAMPING
285 OUTPUT OPTION "P" MAY ONLY BE USED FOR NCAS CARDS FOR B31.3 VERSION >= 2004 FOR TY=3
286 WARNING - PRESSURE ELONGATION OPTION IS SET TO 1
287 ERROR - COLD MODULUS OPTION USED. FOR EDF PIPING CODE, HOT MODULUS OPTION MUST BE USED (SEE MD FIELD ON TITL CARD)
288 WARNING - COLD MODULUS OPTION USED. FOR EDF PIPING CODE, HOT MODULUS OPTION MUST BE USED (SEE EC FIELD ON LCAS CARD)
289 FOR EDF PIPING CODE (SEPTEN Note 91-025D), OCCASIONAL LOADS MAY NOT BE USED FOR EQ=A (EQUATION 4A)
290 INVALID VALUE FOR "CU" FIELD (FATIGUE CURVE OPTION) ENTERED ON "TITL" CARD
291 OPTIONS EQ=9 AND EQ=L MAY ONLY BE USED FOR RCC-M JUNE 2002 (CV=5) AND LATER
292 ZERO SPECTRAL ACCELERATION INTERPOLATING NATURAL FREQUENCY
293 DYNAMIC RESTART INFORMATION INCOMPLETE
998 FEATURE NOT IMPLEMENTED
999 NO DATA
2 ANALYSIS CONTROL CARD MISSING OR OUT OF ORDER
3 Not used
4 ALGEBRAIC COMBINATION INVOLVES UNSIGNED CASES (WARNING)
5 FACTOR J SPECIFIED AND CONSTITUENT CASE J NOT SPECIFIED
6 PIPING CODE INVALID IDEN CARD
7 VALIDATION CODE INVALID IDEN CARD
8 INVALID UNITS OPTION
9 CONSTITUENT CASES MAY BE STATIC CASES OR COMBINATION CASES WITH ME=0 or ME=3
10 MAXIMUM NUMBER OF MODES INVALID ON FREQ CARD
11 INVALID LEFT-OUT-FORCE REPORT OPTION ON FREQ CARD
12 VERTICAL INCORRECTLY SPECIFIED ON IDEN CARD
13 FREQ CARD OUT OF ORDER OR MORE THAN ONE FREQ CARD
14 DUPLICATE CASE NUMBER
15 INVALID ANALYSIS TYPE
16 CONSTITUENT CASE J SPECIFIED AND CONSTITUENT CASE J-1 NOT SPECIFIED
17 MORE THAN 20 CONSTITUENT CASES
18 INVALID METHOD FOR FATIGUE ANALYSIS EQUATION 13 (KTA EQUATION 6)
19 INVALID REPORT VALUE
20 INVALID REPORT TYPE
21 G-FACTOR EXCEEDS 10 ON LCAS CARD
22 LCAS CARD FIELD F4 MUST BE BLANK FOR NON THERMAL LOAD CASE OR CLASS 1
23 NON-ZERO G-FACTOR FOR THERMAL EXPANSION CASE ON LCAS CARD
24 INVALID CASE NUMBER. MUST BE INTEGER IN RANGE 1 TO 900
25 INVALID COMBINATION METHOD
26 FIRST CASE NOT SPECIFIED ON CCAS CARD
27 ONE OF THE CASES TO BE COMBINED DOES NOT CORRESPOND TO A PREVIOUSLY CALCULATED CASE
28 MORE THAN ONE TEST WEIGHT CASE
29 TITL CARD MISSING
30 X, Y AND Z FACTORS MUST BE ZERO FOR WEIGHT OR DYNAMIC DISPLACEMENT ANALYSIS
31 JOB NUMBER ON RESULTS/RESTART FILE DOES NOT AGREE WITH IDEN CARD
32 INPUT RESTART FILE INCOMPATIBLE WITH ROTATIONAL INERTIA OPTION
33 MAXIMUM NUMBER OF ITERATIONS NOT IN THE RANGE 50 .LE. ITMAX .LE. 1000
34 MISSING DAMPING FOR MODAL SUPERPOSITION METHOD
35 X, Y AND Z G-FACTORS CANNOT ALL BE ZERO
36 PERCENT OF CRITICAL DAMPING NEGATIVE OR GREATER THAN 50 PERCENT
37 NO LOAD CASES PRECEDING THIS COMBINATION CASE
38 DURATION OF EARTHQUAKE NEGATIVE
39 GMC OPTION CONFLICTING WITH SUPERPOSITION METHOD
40 GMC OPTION CANNOT BE USED FOR MULTILEVEL ANALYSIS
41 CARD(S) NOT AT THE RIGHT PLACE (SEE SECTION 2 FOR THE ORDER)
42 ALLOWABLE STRESS REFERENCE CASE NOT FOUND ON LSET CARD
43 REFERENCE CASE MUST BE PRESENT ON LSET CARD
44 NUMBER OF CYCLES INVALID ON LSET CARD
45 MISSING EVENT NUMBER ON SPECTRUM CARD
46 INVALID PRESSURE CASE ON LSET CARD
47 INVALID MOMENT CASE ON LSET CARD
48 INVALID TRANSIENT CASE ON LSET CARD
49 RESPONSE ANALYSIS USING LEFT-OUT-FORCE METHOD MUST USE ALL MODES CALCULATED ON RESULTS/RESTART FILE
50 EVENT/LEVEL NUMBERS INCONSISTENT
51 DIRECTION NOT X OR Y OR Z
52 DUPLICATE DIRECTION SPECIFICATION
53 SHIFT NOT BETWEEN 0 AND 50 PERCENT
54 NO SPECTRUM DATA FOLLOW SPEC CARD
55 SPECTRAL ACCELERATIONS TOO GREAT
56 INVALID TEE STRESS COMPUTATION OPTION
57 X, Y AND Z DIRECTIONS HAVE NOT ALL BEEN SPECIFIED
58 OVER 200 FREQUENCY/ACCELERATION OR PERIOD/ACCELERATION PAIRS HAVE BEEN SPECIFIED FOR A GIVEN LEVEL/DIRECTION
59 Not used
60 FREQUENCY OR PERIOD NEGATIVE OR NOT INCREASING FOR A GIVEN LEVEL/DIRECTION
61 Not used
62 NO OPERATING WEIGHT CASE FOR FATIGUE ANALYSIS
63 NO DYNAMIC WITHOUT ANCHOR MOVEMENT CASE FOR FATIGUE ANALYSIS
64 FOR FATIGUE ANALYSIS ALL LOAD SETS WHICH INCLUDE A DYNAMIC MOMENT CASE MUST SPECIFY A PRESSURE CASE
65 NO SEISMIC LOAD SETS FOR FATIGUE ANALYSIS
66 FOR FATIGUE ANALYSIS, THE SEISMIC PRESSURE BASE CASE IS NOT USED FOR ANY MOMENT CASE
67 NO LOAD CASES WERE SPECIFIED
68 NO LOAD SETS WERE SPECIFIED
69 INSUFFICIENT OR INCORRECT INFORMATION FROM FREQUENCY ANALYSIS
70 ONLY ONE LOAD SET WITH DYNAMIC FLAG
71 MORE THAN TWO LOAD SETS WITH THE SAME DYNAMIC FLAG
72 Not used
73 TWO DYNAMIC LOAD SETS SHOULD HAVE THE SAME NUMBER OF CYCLES
74 FILE NAME DOES NOT MATCH SPEC CARD
75 WRONG FIELD F1, F2, F3 OR F4 ON FATP CARD
76 INVALID VALUE FOR SPECTRAL RANGE OPTION (RA)
77 INVALID VALUE FOR FREQUENCY/PERIOD OPTION (FP)
78 PERCENT OF CRITICAL DAMPING NEGATIVE OR GREATER THAN 10 PERCENT
79 PERCENT SHIFT NEGATIVE OR GREATER THAN 50 PERCENT
80 THAFF/GCAS JOB NUMBERS DO NOT AGREE
81 Not used
82 NUMBER OF TIME STEPS ON THAFF LESS THAN 1 OR GREATER THAN 10000
83 POINT WHERE FORCING FUNCTION IS ACTING IS NOT A MASS POINT
84 X, Y AND Z FACTORS ALL ZERO
85 THAFF MISSING
86 THAFF INCORRECT
87 INVALID INTERPOLATION METHOD OPTION (ME)
88 SHIFTED LOWEST NATURAL FREQUENCY OUTSIDE RANGE OF FLOOR RESPONSE SPECTRUM
89 INVALID REPORT OPTION (RP)
90 Not used
91 TOO MANY LCAS + CCAS + CSTR CASES
92 MORE THAN 100 EVENTS
93 SPECTRUM ALREADY SPECIFIED
94 EVENT/LEVEL INVALID
95 MISSING SPECTRUM
96 RESULTANT SUPPORT POINT MOVEMENT OUTSIDE ALLOWABLE RANGE 20 IN (500 MM)
97 REFERENCE CASE MUST REFER TO BASE CASE
98 Not used
99 Not used
100 Not used
101 D2 MISSING
102 NO LEVEL DATA
103 NO MASS POINT DATA FOR MODEL/SUBMODEL
104 D1 MISSING OR OUT OF ORDER
105 NO SPFILE
106 SPFILE NOT IN CORRECT FORMAT
107 SPFILE HEADER=$ERROR. ERROR OCCURRED DURING SPFILE CREATION
108 INPUT UNITS AND SPFILE UNITS DO NOT AGREE (WARNING)
109 END OF FILE ENCOUNTERED ON SPFILE. SPFILE NOT COMPLETE.
110 DUPLICATE SPECTRUM SET (EVENT/MODEL) ON SPFILE
111 Not used
112 DUPLICATE MASSPOINT ON SPFILE
113 NUMBER OF FREQUENCY/ACCELERATION PAIRS INVALID
114 MASSPOINT (S) MISSING ON SPFILE
115 SPECTRUM SET (EVENT/MODEL) MISSING ON SPFILE
116 D2 CASE NUMBER DOES NOT AGREE WITH D1
117 Not used
118 INVALID VALUE FOR SUPERPOSITION OPTION (SU)
119 EVENT MISSING FOR SECONDARY SOLUTION
120 INVALID PRIMARY/SECONDARY CODE (FIELD I3)
121 FIELD I2 MUST BE BLANK OR 0
122 FREQUENCY/ACCELERATION OR PERIOD/ACCELERATION PAIR MISSING
123 NO LEVEL DATA FOR SECONDARY EVENT
124 MAXIMUM X, Y OR Z MOVEMENT NEGATIVE
125 NUMBER OF FREQUENCY/ACCELERATION OR PERIOD/ACCELERATION PAIRS DOES NOT AGREE
126 PRESSURE REFERENCE CASE NOT FOUND
127 FIELDS I2 to I4 NOT USED ON LCAS CARD
128 EVENT NUMBER MISSING ON RCAS CARD
129 INVALID VALUE FOR CODE EQUATION/OUTPUT OPTION (EQ)
130 INVALID VALUE FOR COMBINATION METHOD OPTION (ME)
131 WARNING: STRESS CALCULATED FROM COMBINED MOMENTS
132 Not used
133 THE FIRST CONSTITUENT CASE IS NOT OCCASIONAL FOR COMBINATION METHOD OPTION (ME) = 3
134 REFERENCE CASE MISSING FOR HOT MODULUS ON CCAS OR CSTR CARD
135 RIGID MODE CUT-OFF FREQUENCY OUTSIDE ALLOWABLE RANGE (0 TO 1000 CPS)
136 Not used
137 NUMBER OF FORCING FUNCTION COMPONENTS INVALID ON THAFF
138 NUMBER OF GLOBAL DEGREES OF FREEDOM FOR FORCING FUNCTION INVALID ON THAFF
139 UNITS INVALID ON THAFF
140 UNITS ON THAFF DO NOT AGREE WITH INPUT UNITS (WARNING)
141 LESS THAN 10 TIME STEPS ON THAFF (WARNING)
142 TIME STEPS NEGATIVE OR DECREASING ON THAFF
143 DYNAMIC LOAD CASES WITH NO MODES
144 RESULTS/RESTART FILE NOT IN REQUIRED FORM
145 A CONSTITUENT CASE WITH OUTPUT OPTION (OP) = 8 or 9 or A or B or C or D MAY NOT BE USED FOR THIS CASE
146 Not used
147 Not used
148 Not used
149 INVALID VALUE COLUMN 19
150 MAXIMUM FREQUENCY/MINIMUM PERIOD (FR/PE) OPTION NOT CONSISTENT WITH PREVIOUS RUN
151 MODELLING OPTION NOT COMPATIBLE WITH PREVIOUS RUN
152 CODE VERSION OPTION NOT COMPATIBLE WITH PREVIOUS RUN
153 INVALID VALUE FOR CODE VERSION OPTION
154 INVALID VALUE FOR BODY LOAD OPTION
155 INVALID VALUE FOR GENERATED CASES REPORT OPTION
156 INVALID VALUE FOR GLOBAL/LOCAL REPORT OPTION
157 INVALID VALUE FOR SUPPORT SUMMARY REPORT OPTION
158 THE NUMBER OF TIME STEPS AND THE NUMBER OF MODES MUST BE THE SAME FOR ALL CASES
159 GLOBAL/LOCAL REPORT OPTION NOT COMPATIBLE WITH PREVIOUS RUN
160 ONLY COMBINATION CASES MAY BE SUBMITTED FOR MIXED CLASSES RESTART
161 HOT MODULUS OPTION NOT COMPATIBLE WITH PREVIOUS RUN
162 PIPING CODE OPTION NOT COMPATIBLE WITH PREVIOUS RUN
163 DIRECTION OF GRAVITY NOT COMPATIBLE WITH PREVIOUS RUN
164 STRESSES COMPUTATION OPTION NOT COMPATIBLE WITH PREVIOUS RUN
165 STRESSES COMPUTATION OPTION NOT COMPATIBLE WITH PREVIOUS RUN (WARNING)
166 REG.GUIDE 1.92 VERSION OPTION NOT COMPATIBLE WITH PREVIOUS RUN
167 GLOBAL/LOCAL OPTION INCOMPATIBLE WITH VERSION OPTION
168 STRESS COMPUTATION OPTION INCOMPATIBLE WITH VERSION OPTION
169 REG GUIDE 1.92 VERSION OPTION NOT COMPATIBLE WITH VERSION OPTION
170 WRONG Ci VALUE (S)
171 OUTPUT OPTION 8 OR 9 FOR NON ADDITIVE STRESS CASE OR NO STRESS REPORT REQUESTED
172 LEFT-OUT-FORCE REPORT OPTION INCOMPATIBLE WITH LEFT-OUT-FORCE OPTION
173 REFERENCE CASE NOT COMPATIBLE WITH HOT MODULUS OPTION
174 FACTORS MUST BE POSITIVE
175 SIGNS OF FACTORS FOR SIGNED CASES MUST BE THE SAME
176 MORE THAN ONE G-FACTOR (WARNING)
177 FOR ANSI/B31.3 CODE, THE STRESSES ARE BASED ON LOCAL MOMENTS
178 SUPPORT SUMMARY REPORT REQUESTED AND ALL CASES ARE SUPPRESSED (WARNING)
179 INVALID REFERENCE CASE
180 FOURTH CONSTITUENT CASE NOT USED FOR CSTR CASES
181 MC CASE MAY NOT BE USED FOR ASME EQ. 9 (B31.1 & B31.3 EQ. 12, RCC-M EQ. 11, KTA EQ. 80)
182 MB CASE MAY NOT BE USED FOR ASME EQ. 11 (B31.1 & B31.3 EQ. 14, RCC-M EQ. 8, KTA EQ. 84) AND FOR N-155-2 EQ.8
183 MA CASE IS NOT A SUSTAINED LOAD
184 MB OR MC CASE MAY NOT BE A SUSTAINED LOAD
185 INVALID OPTION
186 MAY ONLY BE USED FOR CLASS 1 ANALYSIS
187 TOO MANY CASES FOR -PIPE LOADS FOR RESTRAINT LOCATIONS- REPORT
188 RESPONSE CASE AND NO SPECTRA
189 Not used
190 IMPROPER TYPE OF CARD FOR THIS VERSION OF CODE
191 INVALID VALUE FOR NON-ADDITIVE STRESS OPTION (FIELD I5) FOR THIS PIPING CODE
192 IMPROPER OUTPUT OPTION FOR THIS VERSION OF CODE
193 THACC FILE MISSING
194 THACC/RACC EVENT NUMBERS DO NOT AGREE
195 THACC FILE INCORRECT
196 NUMBER OF ACCELERATION FUNCTION COMPONENTS INCORRECT
197 NUMBER OF TIME STEPS LESS THAN 1 OR GREATER THAN 100,000
198 MORE THAN 10 RACC-CASES FOR THACC FILE OPTION
199 LEVEL NUMBER MISSING ON FILE THACC
200 INVALID VALUE FOR DAMPING OPTION
201 NO USER DEFINED MODAL DAMPING FILE
202 PP CARD MISSING AFTER RC CARD WITH COL. 19=9
203 NUMBER OF DAMPING VALUES LESS THAN NUMBER OF MODES
204 GCAS AND RACC CANNOT BE CALCULATED IN THE SAME EXECUTION
205 USER DEFINED MODAL DAMPING FILE INCORRECT
206 ACCELERATION MISSING FOR DIRECTION X, Y OR Z, ON THACC FILE
207 DUPLICATE ACCELERATION FOR DIRECTION X, Y OR Z, ON THACC FILE
208 COMPOSITE DAMPING NOT FOUND FOR METHOD REQUESTED
209 HEADER RECORD INCORRECT FOR USER DEFINED MODAL DAMPING FILE
210 NO USER DEFINED DAMPING FOR CASE
211 INVALID VALUE FOR STRUCTURAL DAMPING FILE OPTION
212 NUMBER OF MODAL DAMPING VALUES MUST BE THE SAME FOR ALL CASES ON MODAL DAMPING FILE
213 INVALID UNITS ON SPFILE
214 NEGATIVE FACTOR FOR ALLOWABLE STRESS
215 INVALID VALUE FOR PRESSURE STRESS TERM OPTION
216 FLAG NOT FOUND
217 DUPLICATE FLAG VALUE
218 IMPROPER COMBINATION METHOD, NO OCCASIONAL LOAD CASE (MB CASE)
219 INVALID VALUE FOR METHOD OPTION (COL.S 21-22)
220 FREQUENCIES ARE DIFFERENT ON COMPOSITE DAMPING FILE
221 INVALID VALUE FOR OUTPUT OPTION (OP)
222 THE MIDPOINT OF THE REDUCER MAY NOT BE USED AS FATIGUE 'AT' POINT
223 MAXIMUM RESULTANT MOMENT RANGE METHOD OF COMBINATION REQUIRES AT LEAST TWO CASES
224 ASME CLASS 3 1983 NOT IMPLEMENTED. ASME CLASS 2 1983 IS USED (WARNING)
225 GENERATED CASES MAY NOT BE COMBINED
226 MORE THAN 10 'GCAS' OR 'RACC' CASES
227 FORCE/DISPLACEMENT OPTION INVALID
228 ABSOLUTE/RESULTANT OPTION INVALID
229 CASE NUMBER DOES NOT AGREE
230 CARD NOT AN 'GCAS' OR AN 'RACC'
231 FIELD I3 NOT EQUAL TO '8'
232 MORE THAN 20 LINE NO. PAIRS
233 NO LINE NO. PAIRS
234 INVALID LINE NO.
235 LINE NO.S OUT OF ORDER
236 JOB NO. DOES NOT AGREE
237 NO DEFAULT OUTPUT OPTION FOR DYNAMIC EVENT. FOR OBE USE EQ=3 OR EQ=W. FOR DBE USE EQ=4 OR EQ=Y.
238 B31.1 winter 1981: OUTPUT OPTION 8 = NEW EQUATION 13 (WARNING)
239 NO PAIR OF LOAD SETS WITH THE SAME SITUATION NUMBER
240 MORE THAN TWO LOAD SETS USING THE SAME SITUATION NUMBER
241 THE TWO LOAD SETS OF A SITUATION SHOULD HAVE THE SAME NUMBER OF CYCLES
242 THE PRESSURE ELONGATION OPTION IS NOT USED IN CLASS 1 (WARNING)
243 CSTR CARD MAY NOT BE USED IN CLASS 1
244 INVALID COLD MODULUS OPTION
245 THE REFERENCE CASE CANNOT BE A BASE CASE WITH THE COLD MODULUS OPTION
246 COLD MODULUS OPTION USED FO EARLY CODE VERSION - WARNING
247 THE COLD MODULUS OPTION IS NOT USED IN CLASS 1 (WARNING)
248 DESIGN OPTION MAY NOT BE USED FOR CLASS 1 ANALYSIS
249 THE MOMENT CASE CANNOT BE A SEIMIC CASE
250 THERE MAY BE ONLY ONE COMBINATION CASE WITH A FLAG
251 THE FOLLOWING OPTIONS HAVE BEEN SET: OP=6 (MOMENT AND STRESS REPORT ONLY) EQ=7 (THERMAL EXPANSION STRESSES)
252 PIPING CODE "N" FOR COMPOSITE MATERIALS IS OBSOLETE - PIPING CODE "E" (EDF) MAY BE APPLICABLE
253 CV=S0 HAS BEEN CONVERTED TO CV=S1 (WARNING)
254 NO DEFAULT OUTPUT OPTION FOR THIS ANALYSIS TYPE FOR EDF PIPING CODE
255 FOR EDF PIPING CODE, OCCASIONAL LOADS MAY NOT BE USED FOR EQ=A (EQUATION 4.2A)
256 NON-LINEAR CASES MAY ONLY BE COMBINED BY RANGE METHOD (ME=8)
257 NON-LINEAR LOAD CASES MAY NOT BE USED FOR STATIC EQUIVALENT DYNAMIC EVENTS (TY=1 or TY=2 or Ty=6)
258 INVALID NUMBER OF ITERATIONS FOR NON?LINEAR LOAD CASE
259 PROGRAMMING TO CALCULATE US NAVY PIPING CODE IS THE PROPERTY OF THE ELECTRIC BOAT CORPORATION
260 CASE ORDERING PARAMETERS MUST SATISFY [0 less than or equal x0] AND [0x less than x1] AND [x1 less than or equal 1]
261 MORE THAN 20 NON?LINEAR CASES WITH ORDERING PARAMETERS
262 WESTINGHOUSE GACA METHOD OF MODAL SUPERPOSITION MAY ONLY BE USED FOR SINGLE LEVEL CALCULATIONS
263 TO SELECT WESTINGHOUSE GACA METHOD OF MODAL SUPERPOSITION USE "SU=W" ON RCAS CARD
264 OUTPUT OPTION EQ=S MAY ONLY BE USED FOR SETTLEMENT TYPE ANALYSIS (TY=5)
265 VALID VALUES OF FIELD EQ=2, 3 OR 7
266 COMPONENT DIRECTION VALUES FOR X, Y, Z: ONE OF THESE VALUES MUST=1 AND THE OTHERS MUST=0 FOR EACH COMPONENT
267 Not used
268 OUTPUT OPTION EQ=S MAY ONLY BE USED FOR POST 1977 VERSIONS OF B31.1, ASME CLASSES 2 & 3, B31.3 AND SNCT AND EN 13480-3
269 WARNING: SETTLEMENT ALLOWABLE STRESS FOR ASME CLASS 2 IS USED FOR THIS CASE
270 PP CARD NOT PROCESSED
271 ERROR - COLD MODULUS OPTION USED. FOR EN 13480-3 CODE, HOT MODULUS OPTION MUST BE USED (SEE MD FIELD ON TITL CARD)
272 PRESSURE STRESS TERM Pd2/(D02 - d2) IS NOT DEFINED FOR EN 13480-3
273 ABS SEED NOT IN RANGE 0 < S < 1
274 NUMBER OF CYCLES INVALID
275 WARNING: COLD MODULUS OPTION USED. FOR EN 13480-3 CODE, HOT MODULUS OPTION MUST BE USED (SEE EC FIELD ON LCAS CARD)
276 WARNING - PARAGRAPH 12.3.6-1 FOR EN 13480-3 IS NOT CORRECTLY IMPLEMENTED FOR CREEP
277 HEADER RECORD INCORRECT FOR COMPOSITE MODAL DAMPING FILE
278 COMPOSITE MODAL DAMPING FILE NOT FOUND
279 MORE THAN 20 LEVELS FOR COMPOSITE MODAL DAMPING - CONTACT DST COMPUTER SERVICES
280 COMPOSITE MODAL DAMPING ERROR - SEE MESSAGE
281 MORE THAN 200 MODES FOR COMPOSITE DAMPING
282 END-OF-FILE OR INVALID DATA ENCOUNTERED ON COMPOSITE MODAL DAMPING FILE
283 INSUFFICIENT INFORMATION ON COMPOSITE DAMPING FILE FOR REQUIRED INTERPOLATIONS
284 PERIOD vs ACCELERATION SPECTRA NOT IMPLEMENTED FOR COMPOSITE MODAL DAMPING
285 OUTPUT OPTION "P" MAY ONLY BE USED FOR NCAS CARDS FOR B31.3 VERSION >= 2004 FOR TY=3
286 WARNING - PRESSURE ELONGATION OPTION IS SET TO 1
287 ERROR - COLD MODULUS OPTION USED. FOR EDF PIPING CODE, HOT MODULUS OPTION MUST BE USED (SEE MD FIELD ON TITL CARD)
288 WARNING - COLD MODULUS OPTION USED. FOR EDF PIPING CODE, HOT MODULUS OPTION MUST BE USED (SEE EC FIELD ON LCAS CARD)
289 FOR EDF PIPING CODE (SEPTEN Note 91-025D), OCCASIONAL LOADS MAY NOT BE USED FOR EQ=A (EQUATION 4A)
290 INVALID VALUE FOR "CU" FIELD (FATIGUE CURVE OPTION) ENTERED ON "TITL" CARD
291 OPTIONS EQ=9 AND EQ=L MAY ONLY BE USED FOR RCC-M JUNE 2002 (CV=5) AND LATER
292 ZERO SPECTRAL ACCELERATION INTERPOLATING NATURAL FREQUENCY
293 DYNAMIC RESTART INFORMATION INCOMPLETE
998 FEATURE NOT IMPLEMENTED
999 NO DATA
 |
 |